Livestrong LSPRO1 Manual Del Propietário página 6

TOOLS INCLUDED:
PRE ASSEMBLY
F 5 mm T-Wrench
F 8 mm T-Wrench
F LSPRO1: Screwdriver
UNPACKING
PARTS INCLUDED:
Place the treadmill carton on a level flat surface. It is recommended that you place a
F 1 Console Assembly protective covering on your floor. Take CAUTION when handling and transporting this
unit. Once the banding straps have been removed, do not transport this unit unless it is
F 2 Handlebars
fully assembled. Unpack and assemble the unit where it will be used. Never grab hold of
F 2 Console Masts
any portion of the incline frame and attempt to lift or move the treadmill. Lift the treadmill
F 1 Hardware Kit
from the roller end caps area while a second person removes the parts packed under
F 1 Safety Key
the treadmill.
F 1 USB Cover
F 1 Audio Adapter Cable
F 1 Power Cord
LSPRO1 only:
F 2 Main Frame Boots
DO NOT ATTEMPT TO LIFT THE TREADMILL! Do not move or lift treadmill
F 2 End Caps
from packaging until specified to do so in the assembly instructions. You may
F 1 LIVESTRONG.COM USB Stick
remove the plastic wrap from console masts.
LSPRO2 only:
F 1 Passport Player
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!
NEED HELP?
If you have questions or if
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and
there are any missing parts,
partially threaded in before completely tightening any ONE bolt.
contact Customer Tech
NOTE: A light application of grease may aid in the installation of hardware. Any grease,
Support. Contact information
such as lithium bike grease is recommended.
is located on the back panel
of this manual.
10
LSPRO1and2_OM_Rev1_9.indd 10-11
WARNING
WARNING
ASSEMBLY
LSPRO 1
page 12
LSPRO 2
page 16
11
8/22/11 4:01 PM