Notes On The Documentation; Observing Other Applicable Documents; Document Storage; Symbols Used - Vaillant geoTHERM VWS 220/2 Instrucciones De Operación

1

Notes on the documentation

1 Notes on the documentation
The following instructions are intended to guide you
throughout the entire documentation. Further documents
apply in combination with these operating instructions.
We accept no liability for any damage caused by non-
observance of this manual.
Vaillant geoTHERM heat pumps with an optional external
passive cooling function are generally referred to in this
manual as heat pumps.
1.1

Observing other applicable documents

> During operation, you must also observe all operating
instructions that accompany other components of your
heating installation.
1.2

Document storage

> Store these operating instructions and all other applica-
ble documents in such a way that they are available
whenever required.
> If you move out or sell the appliance, pass on the
documents to the buyer.
1.3

Symbols used

The symbols used in the text are explained below: Symbols
for identifying dangers are also used in this manual (¬ sec-
tion 2.1.1).
i
Symbol that denotes useful tips and infor-
mation
>
Symbol for a required action
4
1.4

Applicability of the manual

These operating instructions apply only for heat pumps
that have the following article numbers:
Type designation
Brine-Water Heat Pumps (VWS)
VWS 220/2
VWS 300/2
VWS 380/2
VWS 460/2
Water-Water Heat Pumps (VWW)
VWW 220/2
VWW 300/2
VWW 380/2
VWW 460/2
1.1 Type designations and article numbers
The 10-digit article number of your heat pump can be found
on the sticker (¬fig. 3.1, item 1) which is located on the
lower right of the front cladding. It is to be read out from
the 7th digit of the serial number.
1.5

CE label

The CE label is documented in the installation instructions.
Operating instructions geoTHERM 0020051578_03
Article number
0010002797
0010002798
0010002799
0010002800
0010002801
0010002802
0010002803
0010002804