Technical Data - Vww - Vaillant geoTHERM VWS 220/2 Instrucciones De Operación

9 Technical data
9.2

Technical data - VWW

Description
Type
Area of application
Fuse
- Trigger characteristics
- Breaking current
Electrical power consumption
- Min. for W10/W35
- Max. for W20/W60
- External auxiliary heater (on-site,
max.)
Coolant circuit
- Coolant type
Heat pump performance data
W10/W35 DT 5K In accordance with
DIN EN 14511
- Heating output
- Power consumption
- Output figure/coefficient
of performance COP
W10/W35 DT 10K In accordance with
DIN EN 255
- Heating output
- Power consumption
- Output figure/coefficient
of performance COP
W10/W55 DT 5K In accordance with
DIN EN 14511
- Heating output
- Power consumption
- Output figure/coefficient
of performance COP
Interior noise level
(W10/W35 in accordance with EN 12102)
Installation site
- Permitted ambient temperature
9.2 Technical data - VWW
Key
W10/W35 DT 5K:
W = Water
10 = 10 °C Inlet temperature
W = Heating water
35 = 35 °C Flow temperature
DT=
Temperature difference based on flow and return of the
heating mode
K = Kelvin
50
Unit VWW 220/2
–
The heat pumps are intended exclusively for domestic use as heating appliances
for closed heating and hot water systems and for hot water generation.
–
Operation of the pump outside the application limits results in the heat pump
being switched off by the internal control and safety installations.
C, three-pole switching (disconnection of the three mains connection lines by a
–
switching operation)
A 20
kW 4,9
kW 10,0
kW 3 x 2,3
-
The following performance data is applicable to new units with clean heat exchangers.
kW 29,9
kW 5,8
- 5,2
kW 30,2
kW 5,5
- 5,5
kW 26,9
kW 7,6
- 3,5
dB(A) 63
°C
VWW 300/2 VWW 380/2
Water-to-water heat pump
25 32
6,6 8,5
12,0 16,0
3 x 2,3 3 x 2,3
R 407 C
41,6 52,6
7,8 9,8
5,3 5,3
42,4 52,3
7,5 9,4
5,7 5,5
37,2 47,4
10,4 12,9
3,6 3,6
63 63
Interior/dry
7 - 25
Operating instructions geoTHERM 0020051578_03
VWW 460/2
40
10,2
18,0
3 x 2,3
63,6
12,4
5,1
64,7
12,0
5,4
57,3
15,8
3,6
65