Beware Of Condensation - Teac DV-20D Manual Del Usuario

Sound skips.
e Place the unit on a stable place to avoid vibration and shock.
e If the disc is dirty, clean the surface of the disc.
e Don't use scratched, damaged or warped discs.
Playback sound isn't full.
e If you are listening to multi-channel sound through 2CH AUDIO OUT, set Downmix setting to Stereo or
Lt/Rt.
Some settings in the SETUP menu do not appear.
e Some settings are available only when Setup Menu Mode is set to "Expert" (see page 80).
Cannot play multi-channel audio.
e Set the Downmix setting to "Multi-Channel".
e Check that the settings in the Speaker Setting screen are correct.
e Display the disc menu and select a multi-channel audio.
No digital audio output.
e Check that Digital Out setting is not set to Off.
Cannot output 96 kHz or 88.2 kHz digital audio.
e Check that 96K LPCM Out is not set to 96K > 48K.
e Some copy protected discs do not output high sampling rate digital audio.
ANGLE mark doesn't appear on the screen.
e Set both the Angle Indicator option and the On Screen Display option to "On".
If normal operation cannot be recovered, unplug the power cord from the outlet and plug it in again. This
resets the internal micro-computer which can be disturbed during electrical storms, power interruptions,
et cetera.

Beware of condensation

When the unit (or a disc) is moved from a cold to a warm place, or used after a sudden temperature
change, there is a danger of condensation; vapor in the air could condense on the internal mechanism,
making correct operation impossible. To prevent this, or if this occurs, leave the unit for one or two hours
with the power turned on. Then the unit will stabilize at the temperature of its surroundings.
Maintenance
If the surface of the unit gets dirty, wipe with a soft cloth or use diluted neutral cleaning liquid. Be sure to
remove any fluid completely. Do not use thinner, benzine or alcohol as they may damage the surface of the
unit.
ENGLISH
83