Teac DV-20D Manual Del Usuario página 56

CD/SACD/VCD
1-9,0
CLEAR
56
STOP
PROGRAM
Programmed Playback 2
To check the programmed content
In the stop mode, press the 5orb button repeatedly.
The programmed content (program number, track number and
playback time) will be shown on the display in the programmed
order.
To delete a programmed track
In the stop mode, press the 5orb button repeatedly until the
programmed track to be deleted is displayed. Then press the
CLEAR button. The selected track is deleted from the program and
the track programmed next is moved to take its place, and is
shown on the display.
To overwrite a programmed track
In the stop mode, press the 5orb button repeatedly until the
programmed track to be changed is displayed. Select a new track
number using the numeric buttons, and then press the ENTER
button.
To add a track to the end of the program
In the stop mode, press the 5 button repeatedly until "--" is
displayed. Select a track number using the numeric buttons, and
then press the ENTER button. The track is added to the end of the
program.
To resume normal playback
In the stop mode, press the PROGRAM button to resume normal
playback. The "PROG." indicator will go off and the program
mode will be cancelled.
However, the programmed content isn't lost. You can return to the
programmed playback by pressing the PROGRAM button and the
PLAY button.
To clear the programmed content
With the unit stopped and the "PROG." indicator lit, press the
CLEAR button to clear the programmed content.
If you are checking the programmed content, press the STOP
button and the CLEAR button.
If one of the following buttons is pressed, the programmed
content will also be cleared:
OPEN/CLOSE, POWER
ENGLISH