Slide Show Mode; Angle Mark; Captions; Digital Out - Teac DV-20D Manual Del Usuario

E
VIDEO AUDIO SPEAKER
TV Display
TV Type
Video Output
Picture Mode

Slide show Mode

Angle Mark

Captions

Set Slide show Mode
F
VIDEO AUDIO SPEAKER
TV Display
TV Type
Video Output
Picture Mode
Slide show Mode
Angle Mark
Captions
Angle Mark On/Off
G
VIDEO AUDIO SPEAKER
TV Display
TV Type
Video Output
Picture Mode
Slide show Mode
Angle Mark
Captions
Closed Caption
H
VIDEO VIDEO AUDIO SPEAKER AUDIO

Digital Out

MPEG Out
96K LPCM Out
Downmix
Audio DRC
Set SPDIF
70
DISC SYSTEM
4:3 LB
PAL
RGB
Auto
None
On
Off
DISC SYSTEM
4:3 LB
PAL
RGB
Auto
None
On
Off
DISC SYSTEM
4:3 LB
PAL
RGB
Auto
None
On
Off
SPEAKER
DISC DISC SYSTEM SYSTEM
Bitstream
PCM
96K>48K
Multi-Channel
Off
Settings 4
E
SLIDE SHOW MODE
This setting is accessible only when SETUP MENU MODE is
set to EXPERT (see page 80).
Some DVD discs contain still pictures that cycle
automatically while audio is played.
The default setting is RANDOM.
Press the ENTER button to select the desired mode from the
following:
TYPE 1-11
TYPE 1 : wipes from top to bottom
TYPE 2 : wipes from bottom to top
TYPE 3 : wipes from top/bottom to center
TYPE 4 : wipes from center to top/bottom
TYPE 5 : vertical blinds
TYPE 6 : wipes from left to right
TYPE 7 : wipes from right to left
TYPE 8 : wipes from left/right to center
TYPE 9 : wipes from center to left/right
TYPE 10 : wipes from edge to center
TYPE 11 : horizontal blinds
RANDOM
Wipes randomly
NONE
No effect
F
Angle Mark
(Expert mode)
This setting is accessible only when Setup Menu Mode is
set to Expert (see page 80).
Select whether the angle message appears on the TV
screen or not when a multi-angles scene is being played.
You can change the angles using the ANGLE button. For the
details, see page 48.
G
Captions
(Expert mode)
This setting is accessible only when Setup Menu Mode is
set to Expert (see page 80).
Select On or Off for closed captions. The default setting for
this feature is "Off". If you wish to view a movie with
captions, turn this feature on.
H
Digital Out
Bitstream:
Select this when the unit is connected to an audio
component equipped with a built-in Dolby Digital or DTS
decoder via the DIGITAL OUT terminal.
PCM:
Select this when the unit is connected to an audio
component such as amplifier/receiver, CD recorder or MD
deck via the DIGITAL OUT terminal.
Off:
Select this when you don't use the DIGITAL OUT terminal.
No signal is output from the DIGITAL OUT terminal.
ENGLISH
(Expert mode)