Overview Of Application Instruments - Storz UNIDRIVE S III ENT Manual De Uso

25
Bedienungshinweise

7. 14 Overview of application instruments

INTRA drill handpiece (2525xx) with EC micromotor II (20711033) and drill 26xxxx,
649xxx K, 649xxx GK, 649xxx GL, 649xxx L)
Intranasal Drill (660000) with EC Micro Motor II (20711033)
High-Speed micromotor (20712033) with High-Speed handpieces (2526xx), drills
(32xxxxxx), (33xxxxxx), (35xxxxxx)
DRILLCUT-X ® II shaver handpiece (40712050/40712055) with shaver attachment
(412xx, 413xx)
DRILLCUT-X II shaver handpiece (40712050/40712055) with sinus burr attachment
®
(413xx)
STAMMBERGER-CASTELNUOVO DRILLCUT-X
STAMMBERGER-CASTELNUOVO DRILLCUT-X
sinus burr attachment (413xx)
Microsaw (254000)*, micro sagittal saw (254100)*, osseoscalpel (254200)*, micro com-
pass saw (254300)*
* with EC micromotor II (20711033)
Dermatome (253xxx) with EC micromotor II (20711033)
Operating instructions
shaver handpiece (40711050)
®
® shaver handpiece (40711050) with
Instrucciones de uso
Page 26 DRILL depending on handpiece and
setting
1,000–40,000 rpm and/or
1,000–80,000 rpm
Page 32 INTRANASAL 3.000–60.000 rpm
Page DRILL depending on handpiece and
39–44 setting
1,700–60,000 rpm and/or
1,700–100,000 rpm
Page 54 DRILLCUT-X ® II 300–10,000 rpm
SHAVER Preset = 4,000 rpm
Page 50 DRILLCUT-X II 300–12,000 rpm
®
SINUS BURR Preset = 12,000 rpm
Page 49 DRILLCUT-X 300–7,000 rpm
®
SHAVER Preset = 7,000 rpm
Page 45 DRILLCUT-X ® 800–12,000 rpm
SINUS BURR Preset = 12,000 rpm
Page 34 SAWS 1,000–20,000 rpm
presetting dependent on
handpiece 15,000 rpm
Page 38 DERMATOMES 1,000–8,000 rpm