Storz UNIDRIVE S III ENT Manual De Uso página 117

108
Anhang
Recommended separation distances between portable and mobile HF communications equipment and the UNIDRIVE
The UNIDRIVE ® S III ENT model 40 7016 20-1 is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The
user of the device can help avoiding electromagnetic interferences by observing the minimum distance between portable and mobile RF telecommunication
devices (transmitters) and the device – as a function of the output power of the communication device, as shown below.
Nominal power of transmitter
[W]
0.01
0.1
1
10
100
For transmitters whose maximum nominal power is not listed in the above table, the recommended separation distance d in meters (m) can be determined
using the equation belonging to the relevant column, where P is the maximum nominal power of the transmitter in Watts (W) as specified by the manufacturer
of the transmitter.
Note: These guidelines may not apply in all situations. The propagation of electromagnetic quantities is affected by absorptions and reflections of buildings,
objects and persons.
Appendix
Table 206
40 7016 20-1
Separation distance d [m]
according to frequency of transmitter
150 kHz to < 80 MHz 80 MHz to < 800 MHz
D
0.12
0.38
1.2
3.8
12
Anexo
®
800 MHz to 2.5 GHz
D
F
0.12
0.38
1.2
3.8
12
S III ENT model
0.23
0.73
2.3
7.3
23