Storing Stations Or Calling Stored Stations; Scanning Stations - Blaupunkt BREMEN SQR 46 DAB Manual De Instrucciones

The functions RDS and REGIONAL are activated and deactivated in the user
menu (see the chapter "User settings", section "Making settings in the
"TUNER" menu", menu items "RDS AF" and " REGIONAL").
Note:
BEDIENUNGSANLEITUNG: BREMEN SQR 46 DAB
• If you adjust a di erent reception area than "EUROPE ", RDS is automati-
cally switched o . The station name continues to be shown on the
display. If you want to use radio stations with RDS features in your
region, switch on RDS in the user menu.
Changing to radio mode or selecting a memory bank
The following memory banks are available in the di erent reception areas:
Region Memory banks
EUROPE FM1, FM2, FMT, AM
ASIA
USA
FM1, FM2, FMT, AM
SOUTH AMERICA
THAILAND
Press the button FM1>FM2>FMT>AM to directly select desired
memory bank is displayed.
Note:
• Up to 5 stations can be stored in each memory bank.
Tuning into a station
There are various ways of tuning into a station.
Starting station seek tuning
Press the button < / > to Auto search the station tuning.
8
BR460 BR460
AUTORADIO
Notes:
• For the reception area "EUROPE": In the FM waveband, only tra c
information stations are turned into if the priority for tra c
information（ ) is switched on.
• The sensitivity of seek tuning can be adjusted . In FM setting, the
sensitivity can be selected, Low or High.
Tuning into stations manually
Press the button / to Manually search
in decrements /increments.

Storing stations or calling stored stations

Bedienungsanleitung
Select the desired memory bank.
If necessary, set the desired station.
Operating instructions
1 - 5
Press the station button
>
current station under the button.
Mode d' emploi
- or -
Brie y press the station button 1 - 5
Istruzionl of uso

Scanning stations

With the scan function, you can scan either every receivable station or
Gebruiksaanwijizing
every stored station of the current waveband.
Note:
Bruksanvisining
• You can adjust the scan time for each station (see the chapter "User
settings", section "Making settings in the "VARIOUS" menu", menu
item "SCAN TIME").
Scanning all receivable stations of the waveband
Press the button MENU for approx. 2 seconds to start scanning.
During the scan, the display alternately displays "SCAN" and
the current frequency as well as memory bank or station name.
Radio mode
change the frequency
for approx. 2 seconds to store the
to call up the stored station.
>
8
22.05.19 17:00 22.05.19 17:00
39