Setting The Sensitivity Of Station Seek Tuning; Storing Stations; Storing Stations Automatically (Travelstore) - Blaupunkt Kingston MP47 Instrucciones De Manejo

Ocultar thumbs Ver también para Kingston MP47:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 71
Tuning into stations manually
You can also tune into stations manually.
To change the set frequency in small incre-
ments,
u
briefl y press the
To change the set frequency quickly,
u
press and hold down the
9 for a longer period of time.
Setting the sensitivity of station
seek tuning
You can choose whether the radio should
only tune into stations providing good re-
ception or whether it can also tune into
those with a weak reception.
u
Press the MENU/OK button ;.
u
Press the
or
until "SENS HI" or "SENS LO" appears
on the display.
The display shows the currently set sensi-
tivity level. "SENS HI6" indicates the high-
est sensitivity, "SENS LO1" the lowest.
u
Press the MENU/OK button ; to
open the menu.
u
Set the desired sensitivity with the
button <.
or
When you have fi nished making your chang-
es,
u
press the ESC/DIS button 5.
Note:
The device stores the sensitivity val-
ue set in the respective FM and AM
waveband.
or button 9.
or button
button < repeatedly

Storing stations

Storing stations manually
u
Select the desired memory bank FM1,
FM2, FMT, AM or AMT waveband.
u
Tune into the desired station.
u
Press and hold down one of the station
buttons 1 - 6 8 for longer than two
seconds to assign the station to that
button.
Storing stations automatically
(Travelstore)
You can automatically store the six sta-
tions offering the strongest reception in
the region for the FM and AM wavebands.
The stations are stored in the FMT or AMT
memory bank.
Note:
Any stations that were previously stored
in this memory bank are replaced by
newly stored stations.
u
Use the BAND button 2 to select one
of the memory banks FM1, FM2 or FMT
for storing FM stations or one of the
memory banks AM or AMT for storing
AM stations.
u
Press and hold down the BAND button
2 for longer than 2 seconds.
The storing procedure begins. The display
shows "FM TSTORE" or "AM TSTORE". After
the process has completed, the radio will
play the station that is stored in memory lo-
cation 1 of the FMT or AMT memory bank.
Radio mode
15
Tabla de contenido
loading

Este manual también es adecuado para:

7 647 623 310

Tabla de contenido