Evaluating Results - Beurer medical BM 85 Instrucciones De Uso

• appears if the measurement could not
be performed properly (see section 10
"Error messages/troubleshooting"). Re-
peat the measurement.
• Now select the desired user memory by pressing the
M1 or M2 memory buttons. If you do not select a user
memory, the measurement is stored in the most re-
cently used user memory. The relevant
appears on the display.
• Press the START/STOP button
blood pressure monitor. The measurement is then
stored in the selected user memory.
If Bluetooth® data transfer has been activated, data is
transferred after having confirmed the user memory. The
blood pressure monitor shows the Bluetooth
during data transfer. Press the START/STOP button
once again to switch off the blood pressure monitor.
Please note that you must add the blood pressure
monitor in "My devices" in the Beurer "HealthManag-
er" app to enable data transfers. The Beurer "Health-
Manager" app must be active to allow data transfers.
or symbol
to switch off the

6. Evaluating results

Cardiac arrhythmia:
This unit can identify potential disruptions of the heart rhythm
symbol
®
when measuring and if necessary, indicates this after the
measurement with the symbol
This can be an indicator for arrhythmia. Arrhythmia is a condi-
tion in which the heart rhythm is abnormal because of flaws in
the bioelectrical system that regulates the heartbeat. The sym-
ptoms (skipped or premature heart beats, pulse being slow or
too fast) can be caused by factors such as heart disease, age,
physical make-up, excess stimulants, stress or lack of sleep.
Arrhythmia can only be determined through an examination by
your doctor.
If the symbol
ment has been taken, it should be repeated. Please ensure that
you rest for 5 minutes beforehand and do not speak or move
27
If you forget to turn off the blood pressure monitor, it will
switch off automatically after approximately 3 minutes. In
this case too, the value is stored in the selected or most
recent user memory and the data is transferred if Blue-
tooth data transfer has been activated. The Bluetooth
®
symbol appears on the blood pressure monitor display
during data transfer.
• Wait at least 5 minutes before taking an-
other measurement!
is shown on the display after the measure-
.
®