Evaluating Results - Beurer medical BM 65 Instrucciones Para El Uso

Ocultar thumbs Ver también para BM 65:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35
no button is pressed, the most recently used user memo-
ry is automatically used after 5 seconds.
• Before the measurement, the last saved test result is brief-
ly displayed. If there is no measurement in the memory,
the instrument always displays the value "0".
• The cuff is pumped up to 190 mmHg. Cuff air pressure is
released slowly.
If a tendency towards high blood pressure is already
detectable, the cuff is pumped up again and cuff pressure
increased further. As soon as a heart rate is detected, the
heart beat symbol
is displayed.
• Heart rate, systolic and diastolic blood pressure are dis-
played.
• Measuring can be cancelled at any time by pressing the
"START/STOP" button.
• "Er" appears if it has not been possible to perform the
measurement properly. Observe the section in these in-
structions on error messages/troubleshooting and repeat
the measurement.
• The test result is saved automatically.
• To switch off, press the "START/STOP" button. If you
forget to turn off the device, it will switch off automatically
after approx. 1 minute.
Wait at least 5 minutes before taking another measurement!

6. evaluating results

Cardiac arrhythmia:
This instrument can identify possible cardiac arrhythmia dis-
orders during measurement and if necessary indicates the
measurement with the flashing icon
This may be an indicator for arrhythmia. Arrhythmia is a
condition where the heart rhythm is abnormal as a result of
defects in the bioelectrical system controlling the heart beat.
The symptoms (omitted or premature heart beats, slow or
excessively fast heart rate) may be caused, among other
things, by heart disease, age, physical predisposition, ex-
cessive use of stimulants, stress or lack of sleep. Arrhythmia
can only be ascertained through examination by your doctor.
Repeat the measurement if the flashing icon
played after the measurement. Please note that you should
rest for 5 minutes between measurements and not talk or
move during the measurement. If the icon
often, please contact your doctor. Any self-diagnosis and
treatment based on the test results may be dangerous. It is
vital to follow your doctor's instructions.
19
.
is dis-
appears
Tabla de contenido
loading

Tabla de contenido