Evaluating Results - Beurer medical BM 47 Manual De Instrucciones

ing on something. Do not cross your legs. Place your feet
flat on the ground.
• To avoid falsifying the measuring result, it is important to
remain still during the measurement and not to speak!
Selecting memory
Press the - or + function button. Select the desired user
memory ( ... ) by pressing the -/+ function button.
You have 4 memories with 30 spaces each to store the
measurements of 4 different people separately. Confirm
your selection with the START/STOP button
Performing the blood pressure measurement
• As described before, attach the cuff and adopt the pos-
ture in which you want to perform the measurement.
• Start the blood pressure monitor with the START/STOP
button . After the full-screen display, the most recently
stored measurement appears. If there is no measurement
in the memory, the unit displays the value "0".
• The cuff automatically inflates. The cuff's air pressure is
slowly released. If the device already recognise a ten-
dency for high blood pressure, it will reinflate and increase
the cuff pressure again. As soon as a pulse is found, the
pulse symbol is displayed.
• Systolic pressure, diastolic pressure and pulse readings
are displayed.
• Measuring can be cancelled at any time by pressing the
START/STOP button
• _ appears if the measurement has not been performed
properly. Take note of the chapter on error messages/
trouble-shooting in these instructions for use and repeat
the measurement.
• The measurement is automatically stored.
• To switch off, press the START/STOP button
If you forget to turn off the unit, it will switch off automati-
cally after approx. 1 minute.
.
Wait at least 5 minutes before taking another measurement.

6. Evaluating results

Cardiac arrhythmia:
This unit can identify potential disruption of the heart rhythm
when measuring and if necessary, indicates this after the
measurement with the symbol
for arrhythmia. Arrhythmia is an illness in which the heart
rhythm is abnormal because of flaws in the bioelectrical
system that regulates the heartbeat. The symptoms (skipped
or premature heart beats, pulse being slow or too fast) can
be caused by factors such as heart disease, age, physical
make-up, excess stimulants, stress or lack of sleep. Ar-
rhythmia can only be determined through an examination by
your doctor. If the symbol
the measurement has been taken, it should be repeated.
22
.
.
. This can be an indicator
is shown on the display after