Intended Use; Technical Data; Parts Of The Machine - Festool DSC-AGC 18 FH Instrucciones De Uso Originales

CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
► The actual load during the entire operating
cycle must be evaluated.
► Depending on the actual load, suitable pro­
tective measures must be defined in order
to protect the operator.
3

Intended use

The power tool is designed for abrasive cutting
on concrete and stone materials without the
use of liquid coolant or lubricant.
The power tool must only be used with Festool
diamond cutting discs in accordance with EN
13236.
Do not use this power tool for polishing or ma­
chining metal.
This power tool is intended for use with
BP Festool battery packs of the same voltage
class.
The user is liable for improper or non-in­
tended use.
4

Technical data

Cordless diamond cutting
system
Motor voltage
Speed (no-load)
Speed settings
Circumferential speed
of sanding tool
Grinding spindle
thread
Sanding tool diameter
DSC-AGC 18
FH
18 V DC
4500–8500 rpm
1
4500 rpm
2
5300 rpm
3
6100 rpm
4
6900 rpm
5
7700 rpm
6
8500 rpm
80 m/s
M 14
125 mm
Cordless diamond cutting
system
Sanding tool thickness max.
Weight as per EPTA
procedure 01:2014
5

Parts of the machine

[1-1] Extractor connector
[1-2]
Thread for auxiliary handle
[1-3] Auxiliary handle
[1-4] On/off switch
[1-5] Retractor lever
[1-6] Dust extraction attachment
[1-7]
Speed control
[1-8] Insulated gripping surfaces (grey
shaded area)
[1-9]
Spindle lock
[1-10] Buttons for releasing the battery pack
[1-11] Capacity button on battery pack
[1-12] Capacity indicator
Accessories shown or described are not always
included in the scope of delivery.
The specified illustrations appear at the begin­
ning of the operating manual.
5.1 Electronics
Smooth start-up
The electronically controlled smooth start-up
function ensures that the power tool starts up
smoothly.
Speed regulator [1-7]
You can continuously adjust the speed within
the speed range using the adjusting wheel .
This enables you to optimise the speed to suit
the respective material. Please also note the
specifications on the sanding tools.
Constant speed
The preselected motor speed is kept constant
through electronic control. This ensures a uni­
form speed even when under load.
Recoil protection
In the event of a sudden speed reduction, e.g. if
the power tool becomes jammed in a separat­
ing cut, the motor is switched off immediately.
English
DSC-AGC 18
FH
3.0 mm
min. 1.0 mm
3.2 kg
21