Emission Levels; Technical Data; Intended Use; Saw Blades - Festool TS 55 FEBQ Manual De Instrucciones Original

English
– Wear protective goggles.
– Regularly clean dust deposits from the mo­
tor housing on the power tool.
– Use an aluminium saw blade.
– Close the viewing window/chip guard.
– Install an upstream residual-current circuit
breaker (RCD, PRCD).
– When sawing panels, they must be lubrica­
ted with petroleum, but thin-walled profiles
(up to 3 mm) can be sawed without lubrica­
tion.
2.6

Emission levels

The levels determined in accordance
with EN 62841 are typically:
Sound pressure level
Sound power level
Uncertainty
CAUTION
Noise generated when working
Risk of damage to hearing
► Use ear protection.
Vibration emission level a
three directions) and uncertainty K measured in
accordance with EN 62841:
Sawing wood
Sawing metal
The specified emission levels (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
– They represent the primary applications of
the power tool.
4

Technical data

Plunge-cut saw
Power
Speed (no-load)
Inclination
Cutting depth at 0°
Cutting depth at 45°
20
L = 90 dB(A)
PA
L = 101 dB(A)
WA
K = 3 dB
(vector sum for
h
a < 2.5 m/s
h
K = 1.5 m/s
a < 2.5 m/s
h
K = 1.5 m/s
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
► The actual load during the entire operating
cycle must be evaluated.
► Depending on the actual load, suitable pro­
tective measures must be defined in order
to protect the operator.
3

Intended use

Circular saws are designed for sawing wood,
materials similar to wood, gypsum and cement-
bonded fibre materials and plastics. When fitted
with the special saw blades for aluminium that
are offered by Festool, these machines can also
be used for sawing aluminium.
Materials containing asbestos must NOT be
processed.
Do not use cutting or sanding discs.
This power tool may only be used by experts or
instructed persons.
The user is liable for improper or non-in­
tended use.
3.1

Saw blades

Only use saw blades with the following dimen­
sions:
2
– Saw blades according to EN 847-1
2
– Saw blade diameter 160 mm
– Cutting width 1.8 mm
2
– Locating bore 20 mm
2
– Standard blade thickness 1.1 – 1.4 mm
– Suitable for speeds of up to 9500 rpm
Festool saw blades comply with EN 847-1.
Only saw materials for which the saw blade in
question has been designed.
TS 55 FEBQ, TS 55 FEQ
2000 – 5800 rpm
CAUTION
1200 W
6500 rpm
-1° to 47° -1° to 47°
0 – 55 mm 0 – 55 mm
0 – 43 mm 0 – 43 mm
TS 55 FQ
1050 W