Technical Data - Dräger THORNE & DERRICK UK X-am 5600 Instrucciones De Uso

Technical data

Extract: see the Technical Handbook for details
Ambient conditions:
during operation and –20 to +50 °C for NiMH power packs of type: HBT
storage 0000 and HBT 0100,
for Alkaline single cells of type:
Duracell Procell MN 1500
–20 to +40 °C for NiMH single cells of type:
GP 180AAHC
Panasonic LR6 Powerline
0 to +40 °C for Alkaline single cells of type:
Varta 4006
700 to 1300 hPa
10 to 90 % (to 95 % briefly) r.h.
Protection class IP 67 for instrument with sensors
Alarm volume Typically 90 dB (A) in 30 cm distance
Operation time
– Alkaline battery/NiMH
rechargeable batteries
(battery holder ABT Typically 9 hours under standard conditions
0100 (X-am 5600))
- NiMH power pack
T4 (HBT 0000) Typically 9 hours under standard conditions
T4 HC (HBT 0100) Typically 10.5 hours under standard conditions
Dimensions approx. 130 x 48 x 44 mm (H x W x D)
Weight approx. 220 to 250 g
CE marking:
Electromagnetic compatibility
(Directive 2004/108/EC)
Explosion protection (Directive 94/9/EC)
Approvals: (see"Notes on Approval" on page 279)
1) The Technical Handbook and Instructions for Use/data sheets for the sensors used and the PC
software CC-Vision for Dräger X-am 5600 are available on the product page of the
X-am 5600 at the following Internet address: www.draeger.com.
See also attached Instructions for Use and Data Sheets of the sensors used.
2) Not subject to BVS10 ATEX E 080X and PFG 10 G 001X performance approval.
1)
.
2)
2)
and for Alkaline single cells of type:
2) 2)
, Varta 4106 ,
23