Technical Data; Parts Of The Machine; Operation; Switching On/Off - Festool CARVEX PS 420 EBQ Manual De Instrucciones

4

Technical data

Jigsaws
Power
110 V version
Stroke rate
Stroke length
Pendulum stroke
Max. inclination (only with accessory WT-PS 400 angle table)
Max. cutting depth (depending on saw blade)
Weight (without cable, with extractor connector) as per EPTA-
Procedure 01:2014
5

Parts of the machine

[1-1] Chip guard
[1-2]
On/off switch
[1-3] Gripping surfaces
[1-4]
Variable speed trigger (only PSB 420
EBQ)
[1-5] Safety lock (only PSB 420 EBQ)
[1-6]
Adjusting wheel for stroke rate con­
trol
[1-7] Swivel plug it connection (only PS 420
EBQ)
[1-8] Mains power cable
[1-9] Extractor connector
[1-10] Saw table change lever
[1-11] Saw blade ejection
[1-12] Replaceable saw table
[1-13] Pendulum stroke switch
[1-14] Base runner
[1-15] Chip ejection opening
The specified illustrations appear at the begin­
ning of the Operating Instructions.
PS 420 EBQ
1500–3800 rpm 1000–3800 rpm
Aluminium
6

Operation

WARNING
Unauthorised voltage or frequency.
Risk of accidents
► The mains voltage and the frequency of the
power source must correspond to the
specifications on the name plate.
► In North America, only Festool machines
with the voltage specifications 120 V/60 Hz
may be used.
CAUTION
Heating of the Plug it connection if bayonet
fitting is not completely locked
Risk of burns
► Before switching on the power tool, make
sure that the bayonet fitting at the mains
cable is closed fully and locked.
Connecting and detaching the mains power ca­
ble [1-8] see figure [2].
6.1

Switching on/off

The power tool features a switch [1-2] on both
sides to turn it on and off.
The PSB 420 EBQ also has a variable speed
trigger [1-4] with a safety lock [1-5]. For con­
tinuous operation, use the button [1-2].
English
PSB 420 EBQ
550 W
400 W
26 mm
4 settings
45° to both sides
Wood 120 mm
20 mm
Steel 10 mm
1.9 kg
17