Symbols; Technical Data; Machine Features; Intended Use - Festool KAPEX Serie Manual De Instrucciones

Circular cross-cut saw
KAPEX KS 120 EB/ KS 88 E
Table of contents
1 Symbols ...................................... 16
2 Technical data ............................. 16
3 Machine features .......................... 16
4 Intended use ................................ 16
5 Safety instructions ........................ 17
6 Commissioning ............................. 18
7 Adjustments ................................ 18
8 Operation..................................... 21
9 Service and maintenance ............... 22
10 Accessories .................................. 23
11 Disposal ....................................... 23
12 Warranty .................................... 23
13 EU Declaration of Conformity .......... 24
1

Symbols

Warning of general danger.
Read the Operating Instructions/
Notes!
Danger area! Keep hands, fi ngers
and arms away from this area.
Wear protective goggles.
Wear ear protection.
Wear a dust mask.
Wear protective gloves.
Caution: laser beams!
Dispose of the machine, accessories
and packaging at an environmentally
responsible recycling centre.
2

Technical data

Power
Rotational speed (idle)
Tool spindle, dia.
Weight
KS 120 EB
KS 88 E
Protection class
1600 W
1400 - 3400 rpm
30 mm
21.5 kg
20,7 kg
/ II
16
See section 8 "Operation" for the maximum
workpiece dimensions.
The specifi ed illustrations can be found at
the beginning an at the end of the operating
instructions.
Components on illustrations marked with *
are only included in the scope of delivery of
the KS 120 EB.
3

Machine features

(1.1) Hand grip
(1.2) On/off switch
(1.3) Switch-on lock
(1.4) Lever for cutting depth limiter
(1.5) Rotary knob for clamping the guide
fi xture
(1.6) Transport safety device
(1.7) Scale for mitre cuts (vertical)
(1.8) Scale for mitre cuts (horizontal)
(1.9) Clamp lever for mitre cuts (horizontal)
(1.10) Stop lever for preset mitre cut angles
(horizontal)
(1.11) Rotary handle for fi ne adjustment of
mitring angle (vertical) *
(2.1) On/off switch for laser*
(2.2) Adjusting wheel for rotational
speed
(2.3) Fastfi x spindle lock
(2.4) Clamping lever for stop ruler
(2.5) Release lever for special cutting posi-
tion*
(2.6) Lever for special cutting position*
(2.7) Cable holder with integral handle
(2.8) Clamp lever for mitre cuts (vertical)
(2.9) Selector switch for mitre angle range
(vertical)
* Only included in the scope of delivery of
the KS 120 EB.
4

Intended use

The electric power tool is a stationary unit
designed for sawing blocks of wood, plastic,
aluminium profi les and similar materials.
Do not process other materials, in particular
steel, concrete and mineral materials.
The electric power tool is designed and ap-
proved for use by trained persons or spe-
cialists only.
The user bears the responsibility for
damage and accidents caused by
improper use.Other risks
In spite of compliance with all relevant design
regulations, dangers may still present them-
selves when the machine is operated, e.g.:
• Workpiece parts being thrown off