Setting Bake/Convection Bake; Bake/Convection Bake; To Set The Oven - Thermador PRG30 Manual De Uso

Ocultar thumbs Ver también para PRG30:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Setting Bake/Convection Bake

Bake/Convection Bake

These cooking modes are for baking, roasting or warming using one, two or three racks.

To Set the Oven

1. Select BAKE mode or CONVECTION BAKE mode
using the Mode Selector Knob.
2. Set oven temperature using the Temperature Selector
Knob.
If using CONVECTION BAKE, set the
Temperature Selector Knob 25°F below the
temperature suggested in the recipe. No variation
in temperature setting is necessary if roasting
meats or poultry.
The convection fan turns on six (6) minutes after
the oven is turned on if the CONVECTION BAKE
mode is selected.
The OVEN and HEATING lights turn on.
HEATING
OVEN
The temperature indicator will start to move toward
the temperature setting.
Note:
The powerful Bake Burner is programmed to cycle
while preheating, to spread the heat evenly throughout
the oven.
CLEANING
The oven is preheated to the set temperature when
the HEATING light cycles off the first time.
OVEN
HEATING
The temperature indicator will reflect the
temperature setting.
The needle of the temperature indicator will move
to the new selected temperature if the temperature
setting is increased or decreased. The gauge is for
reference only.
The OVEN light stays on during any active cooking
mode, and remains on until either of the oven
control knobs is turned to the OFF position.
As the oven cools down, the temperature indicator
will reduce to reflect the cooling oven temperature.
Figure 25: Control Panel
CLEANING
English 25
Tabla de contenido
loading

Tabla de contenido