Eliminating Minor Faults Yourself - Bosch KGN Serie Instrucciones De Uso

Eliminating minor faults yourself

Before you call customer service:
Please check whether you can eliminate the fault yourself based on the following
information.
Customer service will charge you for advice, even if the appliance is still under
guarantee!
Fault
Temperature differs greatly
from the set value.
The light does not function.
Fig. 1/10.
The temperature in the
refrigerator compartment
is too cold.
Displays do not illuminate.
The temperature in the
freezer compartment
is too warm. is too warm.
Possible cause
Light switch is sticking.
The light (LED) is defective.
Colder temperatures in the
freezer compartment may also
result in colder temperatures in
the refrigerator compartment.
This is a consequence of
refrigeration.
Power failure; the fuse has been
switched off; the mains plug has
not been inserted properly.
S Freezer compartment door is
open.
S The ventilation openings are
blocked.
S Too much food was placed in
the freezer compartment at
once.
Remedial action
In some cases it is adequate
to switch off the appliance for
5 minutes.
If the temperature is too high, wait
a few hours and check whether the
temperature has approached the
set value.
If the temperature is too low, check
the temperature again the next day.
Check whether the light switch can
move. Fig. 1/9
See Light" section.
Slightly increase the temperature in
the refrigerator compartment.
If this is not adequate, e.g. because
ambient temperatures are too cold,
also increase the temperature in the
freezer compartment.
Check whether the power is on,
the fuse must be switched on.
Close the door.
Ensure that there is adequate
ventilation.
Do not exceed max. freezing
capacity.
en
33