To Replace The Radiator Coolant; To Replace The Fuel Filter - Husqvarna FS5000 D Manual Del Usuario

a) Put a container below the engine.
b) Loosen the screw and let the oil run out into the
container.
c) Tighten the screw.
4. Fill oil into the tube while you look through the
inspection window.
5. Fill until you see that the oil level is correct.
6. Tighten the left screw.

To replace the fuel filter

WARNING: Use protective gloves to prevent
skin irritation. Fuel can come from the fuel
filter and onto your skin.
1. Close the valve of the prefilter. For more information,
refer to the engine manual.
2. Turn the fuel filter counterclockwise to remove it.
3. Replace the fuel filter.
4. Fill the new fuel filter with diesel fuel.
1143 - 002 - 08.07.2019
5. Lubricate the seal with some drops of diesel fuel.
6. Install the fuel filter.
7. Open the valve of the prefilter before you start the
engine.

To replace the radiator coolant

WARNING: Risk of burn injuries. Let the
engine become cool before you open the
radiator coolant lid.
1. Remove the rear cover.
2. Put an extension on the valve.
3. Open the valve.
4. Remove the radiator coolant lid. The radiator coolant
drains from the system.
5. Close the valve.
6. Fill with radiator coolant until the level is between the
2 marks on the radiator coolant bottle. Refer to
Technical data on page 42 for correct radiator
coolant type and mixture.
35