Maintenance; General; Maintenance Schedule; Cleaning - Husqvarna K6500 Ring Manual De Instrucciones

General

WARNING! The user must only carry out the maintenance and service work described in this
!
manual. More extensive work must be carried out by an authorized service workshop.
Inspection and/or maintenance should be carried out with the motor switched off and the plug
disconnected.
Wear personal protective equipment. See instructions under the heading "Personal protective
equipment".
The life span of the machine can be reduced and the risk of accidents can increase if machine
maintenance is not carried out correctly and if service and/or repairs are not carried out
professionally. If you need further information please contact your nearest servicing dealer.
Let your Husqvarna dealer regularly check the machine and make essential adjustments and repairs.

Maintenance schedule

In the maintenance schedule you can see which parts of your machine that require maintenance, and with which
intervals it should take place. The intervals are calculated based on daily use of the machine, and may differ depending
on the rate of usage.

Cleaning

Functional inspection
*See instructions in the section "Machine's safety equipment".
** See instructions in the section "Blades" and "Assembly and settings".
Cleaning

External cleaning

• Clean the machine daily by rinsing it with clean water after the work is finished.
!
22 – English

MAINTENANCE

Daily maintenance
External cleaning
General inspection
Water system
Throttle trigger*
Throttle lockout*
Blade guard*
Blade**
Support and guide rollers
WARNING! Do not use high-pressure washers to clean the machine.
Weekly maintenance/40 hours
Vibration damping system*
Drive belt
Monthly maintenance
Drive wheel