Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Technical Data
Power supply:
Power consumption:
max.
without external load
Protection class:
Protection type:
Conformity:
Ambient temperature:
Measuring range:
User power supply:
Durability relay:
Current loop:
SD card interface:
WLAN:
Dimensions:
Weight:
Other:
Water connection
Working pressure:
Water intake:
Water drain:
Water temperature:
Properties
Water sample**
* When using the Testomat
0.3 bar, it must be ensured that a minimum flow quantity of 400
ml/min can traverse the measuring chamber.
** see also notes on page 10
230 VAC or 100 – 240 VAC
±
10%, 50 - 60 Hz
Complete protection T4A including user
power supply
230V (100-240V) / 4A
230V (100-240V) / 1A
I
IP 44
EN 61326-1, EN 61010-1
10 – 40°C
See section "Service description"
Switched power supply with 4A fuse-
protected
DC: 8A at 30V or 0.28A at 250V
AC: 8A at 415V
0/4 - 20 mA
Maximum load 500 ohm corresponding to
10V voltage, voltage isolated
For SD and SDHC cards up to max.
32GByte, FAT/FAT32 formatting
Optional including WLAN SD card in the
accessories
W x H x D = 380 x 480 x 280 mm
Around 9.0 kg
The device is power-failure protected
5
1 to 8 bar / 1x10
to 8x10
or
5
0.3* to 1 bar / 0.3x10
to 1x10
(after removing the valve body)
Opaque pressure hose with external diame-
ter 6/4x1 mm
Hose with internal diameter 12 mm
10 – 40°C
pH value >4
CO
value < 20 mg/l
2
®
EVO TH with an upstream pressure of
Technical Data
5
Pa
5
Pa
80
Tabla de contenido
