During Assembly; During Operation; Switching On/Off - Testomat EVO TH Serie Manual De Instrucciones

Dispositivo automático de análisis en línea para dureza total residual (dureza del agua)
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Important safety information
!
WARNING
NOTE
!
ATTENTION
10

During assembly

• Always disconnect the relevant system component from the power
source before assembling the device or connecting it to the power
supply or disconnecting it from the same. Prevent any inadvertent
reactivation of the device.
• Only connect the device to the mains voltage as specified on the
type plate.
• Observe the technical data and the environmental parameters.
• The connections for mains voltage and relay outputs must be laid
separately from each other, to guarantee corresponding insulation
between the cables. Accordingly, do not operate the device if the
partition walls or terminal area covers are not present.
Avoiding interference voltages
®
The Testomat
EVO TH device requires stable and uninterrupted
supply voltage. Where applicable, use a mains filter to shield the
®
Testomat
EVO TH device from interference voltages, which may be
generated for example within the network by magnetic valves or
large-scale engines. Never lay the connecting cables in parallel to
mains cables.
Handling may cause damage or destruction of electrical compo-
nents!
If you need to open the upper door, you should take the necessary
safety measures to avoid electrostatic discharge onto the compo-
nents (ESD safety).
Make sure you are earthed before opening the casing.

During operation

• Switching on/off

Wait at least five seconds before switching the device on and off
via the main switch.
• Ensure that the maximum electrical load capacity of the switching
outputs is not exceeded, particularly for inductive loads. The power
supply for the user inclusive device is secured with a 4A fuse,
which means the total of all loads must not reach 4A.
• In the event of any malfunctions, immediately switch off the Tes-
®
tomat
EVO TH device and inform the service personnel. Never at-
tempt to repair the Testomat
will invalidate the guarantee. Repairs must be performed by au-
thorized service personnel only.
®
EVO TH device yourself. Doing do
Tabla de contenido
loading

Este manual también es adecuado para:

Evo th 2005Evo th 2025Evo th 2100Evo th 2250

Tabla de contenido