Idiomas disponibles
Idiomas disponibles
EN
Coffee grinder-dosers / Coffee grinders for grocery stores
7
ANOMALIES - CAUSES - REMEDIES
The table shows the possible anomalies that can cause non- and/or incorrect operation
of your appliance. For each anomaly, the possible cause that generated it and the
actions to be taken to restore its correct operation are indicated.
Anomaly
The appliance does
not switch on.
Coffee beans do not
descend from the
supply hopper.
The
motor
stops
during grinding.
ATTENTION! If the anomaly persists even after carrying out the suggested
corrective actions, or if functional anomalies occur that are not listed in the
table, contact your local dealer who will decide whether to request the assis-
tance service of Fiorenzato M.C. S.r.l. or to entrust the repair or overhaul of
the appliance to a specialist technician.
36 / 40
Fiorenzato | Coffee grinder-dosers + Coffee grinders for grocery stores_00 Ed. 06/2022
Cause
No electric power.
Shutter closed.
Motor protection ther-
mal cut-out intervention
due to blocking of the
grinding system in the
presence of objects or
foreign bodies between
the grinders.
Solution
• Make sure that the switch is in the
"I" (ON) position;
• Make sure that the circuit breaker
upstream of the socket (if present)
is in the ON position.
• Make sure that the power cable
is undamaged and correctly con-
nected to the electrical socket en-
visaged in the place of use.
• Open the shutter.
• Turn off the appliance and wait for
it to cool completely.
• Disconnect the appliance from the
power supply.
• Close the shutter and remove the
supply hopper.
• Clean the grinding chamber and
remove any foreign bodies.
• Reassemble the appliance and
start a grinding cycle.
