Support Of The Workpieces; Sawing - Festool TS 75 EQ Manual De Instrucciones

To switch off, release the „On"-"Off" switch.
11.1
After the machine has been switched
off, the saw blade will still rotate for a time. Take
care that parts of your body do not come into con-
tact with the saw blade while it is still rotating!
As soon as you remove the machine from the work-
piece once sawing has been completed, the ma-
chine automatically returns to its basic position
and the saw blade is again completely covered by
the protective covering.

Support of the workpieces

Ensure that your workpieces are securely fi xed and
cannot move during sawing. Otherwise, there is an
increased risk of accident. Never hold the work-
piece to be cut with your hands or between your
legs. Use instead screw clamps (12.1) or some other
suitable devices to fi x your workpiece.
Never position large or long workpieces so that
they bend in the middle or at the cutting face. This
can lead to the saw blade jamming and recoiling.
Instead, support the workpiece with several wood-
en battens (12.2), particularly in the vicinity of the
cutting face.
11.4
11.3
11.2
before cutting begins and should only be switched
off once cutting has fi nished.
(pushing the circular saw forwards, 13.3) and never
towards you (pulling the circular saw backwards).
If you saw towards you, there is the danger that the
circular saw might be accelerated out of the cutting
groove (recoil) and cause serious injury.
12.1
13.1
A) Sawing sections:
- Place the front part of the saw bench on the work-
piece. The cutting indicator (13.2) displays the
cutting line for 0° and 45° cuts (without guide rail).
- Switch the machine on, and press the saw down
to the set cutting depth.
- Push the machine in the direction of cut. Take
care that the saw bench remains fi rmly on the
workpiece.
- Switch the machine off when cutting is com-
pleted.
B) Plunge cuts:
lowing in structions absolutely must be observed
when plunge cutting:
10

Sawing

The machine must reach full speed
Only operate the saw away from you
13.2
In order to avoid kickbacks, the fol-
12.2
13.3