Technical Data; Parts Of The Machine; Commissioning; Switching On/Off - Festool ISC 240 Li Manual De Instrucciones Original

4

Technical data

ISC 240 Li cordless insulating-material saw
Motor voltage
Stroke rate
Stroke length
Max. cutting depth
Cutting set, short
Cutting set, long
Weight without battery pack
Weight as per EPTA procedure
01:2014:
5

Parts of the machine

[1-1] Auxiliary handle
[1-2] Main handle
[1-3] Lint filter
[1-4] Buttons for releasing the battery pack
[1-5] On/off switch
[1-6] Rotary knob for changing the cutting
set
[1-7] Cutting set
[1-8] Protective cover
[1-9] Extractor connector
Accessories shown or described are not always
included in the scope of delivery.
The illustrations specified are located at the be­
ginning and end of the operating instructions.
6

Commissioning

6.1

Switching on/off

The power tool features an on/off switch on
both sides. Use either switch to switch the pow­
er tool on or off.
Switching on
► Press the on/off switch [1-5] twice in quick
succession.
Switching off
► Press the on/off switch [1-5] once.
6.2

Selecting a cutting set

Only use cutting sets that have been ap­
proved by the manufacturer.
Two cutting sets, each available in two lengths,
are available for machining.
Cutting set with serrated saw blade (available
as an accessory depending on the model)
14.4–18 V
3000 rpm
26 mm
The cutting set with serrated saw blade
must be adjusted before initial operation,
240 mm
see section 8.3.
350 mm
To ensure an optimum tool life for the ser­
1.8 kg
rated saw blade, use a separate cutting set
for mineral wool and a separate cutting
2.5 kg
set for natural fibres. The saw blade is no
longer suitable for sawing natural fibres
once it has been used to saw mineral wool.
Cutting set with cross-set saw blade
(accessory)
Insulating material
Flexible natural fibres
< 90 kg/m³
Flexible mineral wool
< 100 kg/m³
Pressure-resistant mineral
wool
100–170 kg/m³
The cutting set with serrated
saw blade (SG-240/W-ISC,
SG-350/W-ISC) consists of a
guide rail with both a movable
and a fixed saw blade.
The cutting set with cross-set
saw blade (SG-240/G-ISC,
SG-350/G-ISC) consists of a
guide rail and a movable saw
blade.
Saw blade
English
17