Parkside PMRA 20-Li B2 Traduccion Del Manual De Instrucciones Originale página 44

GB MT
tion of the device before using
it. Do not use the device if its
safety equipment, parts of the
cutting unit or bolts are missing,
worn or damaged. Damaged
tools and bolts must only be
replaced as a set to prevent im-
balance.
• Take care when using devices
with several cutting tools since
the movement of one blade can
lead to rotation of the other
blades.
• Only use spare parts and acces-
sories which are supplied and
recommended by the manufac-
turer. Using externally produced
parts results in the immediate
loss of the warranty claim.
• Ensure correct installation of
the automatic perimeter guard
system according to the instruc-
tions.
Using the device:
Do not bring your feet or
hands into the vicinity of
rotating parts (or beneath
them) when working. Risk of
injury!
Observe noise protection
rules and other local regula-
tions.
• Never leave the machine unat-
tended if you know that pets,
children or other people are
nearby.
44
• Use the machine only in day-
light or with good artificial light-
ing.
• Avoid operating the machine
when the grass is wet.
• Do not operate the machine if
you are not wearing closed foot-
wear. Always wear sturdy shoes
and long trousers.
• Always make sure you have a
firm footing on slopes.
• Be especially careful when turn-
ing the machine towards you.
• If foreign bodies enter the cut-
ting tools, or if the machine
generates unusual noises or
vibrates unusually, immediately
turn off the power supply (STOP)
and allow the machine to come
to a standstill. Disconnect the
machine from the mains supply
and perform the following steps
before switching the machine
on again and operating it:
- Check the machine for dam-
age;
- replace or repair all damaged
parts;
- check whether there are any
loose parts and tighten as nec-
essary.
• Switch off the device, wait for
the blades to come to a stop
and remove the battery from the
device.
– before a blockage is removed;
– before checking, cleaning or
working on the machine;
– to check the machine for dam-
age after a foreign object has
entered;