ECOFOREST HC 2014 Manual De Instalación Y Mantenimiento página 39

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Cleaning outlet.
5.9.
Cleaning of the gas outlet circuit. Always with the boiler disconnected. (Very important).
For an optimal cleaning of the extractor's collector, it is recommended to dismantle the extractor itself in
order to have full access to this zone for a better cleaning. Once the extractor is dismantled, clean it with a
dry brush and be careful with the turbine and structure.
When reassembling the exhaust it is COMPULSORY to replace the exhaust joint with a new one as you run
the risk of gas entering in our home.
Ceramic fiber joint (replace).
Gas outlet extractor.
Nuts and washers. (5 units).
5.10. Dismantling and cleaning of gas outlet pipes.
When mounting the gas outlet pipeline, make sure it is well assembled, preferably sealed with silicone. If the
pipe has sealing joints, you must verify its good condition and replace it if necessary.
5.11. Lubrication of the screw and spring of the gas security valve. It is placed in the right side of the boiler, just
above the cleaning outlet.
Lubrication point.
5.12. Empty the hopper to take remaining pellets out to avoid pellets absorb humidity.
5.13. Review the fireplace door joints.
Review in detail any imperfections which may cause an air inlet. Replace them if necessary.
38
Drawing 14
Drawing 15
Drawing 16
Tabla de contenido
loading

Este manual también es adecuado para:

Hb 2014

Tabla de contenido