Idiomas disponibles
Idiomas disponibles
▶ Dust produced by grinding, sanding, cutting and drilling can contain dangerous chemicals. Some
examples are: lead or lead-based paints; brick, concrete and other masonry products, natural stone
and other products containing silicates; certain types of wood, such as oak, beech and chemically
treated wood; asbestos or materials that contain asbestos. Determine the exposure of the operator and
bystanders by means of the hazard classification of the materials to be worked. Implement the necessary
measures to restrict exposure to a safe level, for example by the use of a dust collection system or by
the wearing of suitable respiratory protection. The general measures for reducing exposure include:
▶ working in an area that is well ventilated,
▶ avoidance of prolonged contact with dust,
▶ directing dust away from the face and body,
▶ wearing protective clothing and washing exposed areas of the skin with water and soap.
▶ Wear eye protection, a hard hat and ear protection and suitable respiratory protection while the product
is in use.
▶ Take frequent breaks and do physical exercises to improve the blood circulation in your fingers. High
vibration during long periods of work can lead to disorders of the blood vessels and nervous system in
the fingers, hands and wrists.
▶ Keep the air vents clear at all times. Risk of burn injuries due to blocked air vents!
▶ Do not let go of the grip after guiding the saw head down. Always guide the saw head smoothly back to
the top position. Any uncontrolled movement of the saw head can lead to a risk of injury.
▶ Do not use dull, cracked, buckled or damaged saw blades. Saw blades with dull or incorrectly set teeth
produce a narrow kerf, causing excessive friction, blade binding and kickback.
▶ Never attempt to remove offcuts, wood chips or the like from the cutting zone while the saw is running.
Always first switch the saw off and guide the saw head back to the top position.
▶ Use only saw blades approved for the product that comply with the specifications set out in the technical
data and/or on the product (e.g. diameter, speed of rotation, thickness, arbor hole size, material, etc...)
and are tested and marked in accordance with the EN 8471 standard.
▶ Use only saw blades with a rated maximum permissible speed at least as high as the maximum speed
stated on the product.
▶ After working, do not touch the saw blade until it has cooled down. The saw blade gets very hot when
work is in progress.
▶ Wear protective gloves when changing the saw blade.
▶ Before using the saw, always check that the guard closes correctly. Move the saw head down and guide
it smoothly back up to the top position. Do not operate the saw if the guard does not move freely and
close instantly as soon as the saw head is lifted. Never clamp or tie the lower guard in the open position.
▶ Never use the product without the guard.
▶ When cutting aluminum profiles, always run the power tool at low speed.
▶ Use and always secure the extension supports mounted on the product.
▶ For transport, hold the product only at the points provided for the purpose (grip recesses and transport
handle). Never carry the power tool by the sliding arm or the grip. → page 21
▶ Avoid overheating the tips of the saw blade teeth. When cutting plastic, melting of the plastic should be
avoided.
2.4
Careful handling and use of batteries
▶ Comply with the following safety instructions for the safe handling and use of Li-ion batteries.
Failure to comply can lead to skin irritation, severe corrosive injury, chemical burns, fire and/or explosion.
▶ Use only batteries that are in perfect working order.
▶ Treat batteries with care in order to avoid damage and prevent leakage of fluids that are extremely
harmful to health!
▶ Do not under any circumstances modify or tamper with batteries!
▶ Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C
(176 °F).
▶ Never use or charge a battery that has suffered an impact or been damaged in any other way. Check
your batteries regularly for signs of damage.
▶ Never use recycled or repaired batteries.
▶ Never use the battery or a battery-operated power tool as a striking tool.
▶ Never expose batteries to the direct rays of the sun, elevated temperature, sparking, or open flame. This
can lead to explosions.
▶ Do not touch the battery poles with your fingers, tools, jewelry, or other electrically conductive objects.
This can damage the battery and also cause material damage and personal injury.
6
English
2395173
*2395173*
