Idiomas disponibles
Idiomas disponibles
ELECTRICAL CONNECTION
Important
The connection must be made by author-
ised, skilled personnel, in accordance with
the relevant legal requirements, using ap-
propriate and specified materials.The appli-
ance is supplied with operating voltage
240V/1N.
Caution - warning
Before doing any work, cut off the mains elec-
tricity supply.
Connect the appliance to the mains electricity sup-
ply as follows.
1 - If not already present, install a circuit-breaker
(A) with overload cutout and differential safety
breaker close to the appliance.
2 - Pull off the knob (B).
A
3 - Undo the screws (C) and remove the control
panel (D).
4 - Undo the screws (E) and remove the lid (F).
5 - Connect the circuit-breaker (A) to the terminal
board (G) of the appliance as shown in the dia-
gram and in the electrical system diagram at
the back of the manual. Use a cable with at
least H05RN-F characteristics.
Important
When connecting, take care to connect the
neutral and earth lines.
6 - Replace the lid (F) and the control panel (D) on
completion of the operation.
C
E
B
C
D
- 17 -
F
E
G
IDM-39611400501.tif
IT
GB
DE
FR
ES
English
