Idiomas disponibles
Idiomas disponibles
To carry out this operation, proceed as follows.
1 - Remove the bottom plate (C) and the grid (D)
from the oven and clean them thoroughly.
2 - Clean the inside parts of the oven to remove
any deposits which may impair its operation.
3 - Dry the surfaces and reassemble the compo-
nents.
To carry out this operation, proceed as fol-
lows.
1 - Turn off the gas supply tap
2 - Pull off the knob (A).
3 - Undo the screws (C) and remove the control
IT
IT
panel (B).
4 - Undo the screw (D) of the pressure connection.
GB
GB
5 - Connect the pressure gauge (E) to the pressure
test point (F).
6 - Turn the gas supply tap back on.
DE
DE
7 - Light one of the burners, turn the knob to the full
flame setting (see page 8) then check that the
FR
FR
pressure reading is the same as the values pro-
vided in the table (see back of manual).
ES
ES
8 - Turn off the burner, disconnect the pressure
gauge and restore the initial conditions after
completing the operation.
English
CLEANING OVEN
CHECKING GAS PRESSURE
D
C
C
A
B
C
- 12 -
IDM-39611400700.tif
E
F
D
IDM-39610802100.tif
