Qilive Q.6922 Manual De Instrucciones página 14

Setting the timer to turn one cooking zone off
EN
Touch the heating zone selection control that you
want to set the timer for.
In short time, touch timer control, the "10" will show
in the timer display and the "0" flashes.
Set the time by touching the slider control (e.g. 5).
Touch timer control again, the "1" will flash.
Set the time by touching the slider control (e.g. 9),
now the timer you set is 95 minutes.
When the time is set, it will begin to count down
immediately. The display will show the remaining
time.
Note: The red dot next to power level indicator will
illuminate indicating that zone is selected.
When the set time is up, the corresponding cooking
zone will be switched off automatically.
Note: Other cooking zones will keep operating if they were turned on previously.
Setting the timer to turn more than one cooking zone off
The steps for setting more zones are similar to the steps of setting one zone.
When you set the time for several cooking zones simultaneously, decimal dots of the relevant
cooking zones are on. The minute display shows the min. timer. The dot of the corresponding
zone flashes.
14