Qilive Q.6922 Manual De Instrucciones página 10

4.3. HOW TO USE
EN
4.3.1. START COOKING
Touch the ON/OFF control. After power on, the buzzer beeps
once, all displays show "–" or "– –", indicating that the induction
hob has entered the state of standby mode.
Place a suitable pan on the cooking zone that you wish to use.
Make sure the bottom of the pan and the surface of the cooking
zone are clean and dry.
Touching the heating zone selection control, and an indicator
next to the key will flash.
Select a heat setting by touching the slider control.
If you don't choose a heat setting within 1 minute, the
•
Induction hob will automatically switch off. You will need
to start again at step 1.
You can modify the heat setting at any time during
•
cooking.
If the display flashes
you have not placed a pan on the correct cooking zone or,
•
the pan you're using is not suitable for induction cooking or,
•
the pan is too small or not properly centered on the cooking zone.
•
No heating takes place unless there is a suitable pan on the cooking zone. The display " " will
automatically disappear after 1 minute if no suitable pan is placed on it.
4.3.2. FINISH COOKING
Touching the heating zone selection control that you wish to
switch off.
Turn the cooking zone off by touching the slider to "|". Make
sure the display shows "0".
Turn the whole cooktop off by touching the ON/OFF control.
alternately with the heat setting, this means that:
10
Power up
Power down