Nouvag TCM 3000 BL Instrucciones De Uso página 22

TCM 3000 BL
5.1 Switching on the TCM 3000 BL
The unit can be switched on and off with the main switch "I/O" at the mains connection located at the
back.
 The display is illuminated.
5.2 Keyboard and display of the TCM 3000 BL
1
5.3 Overview of the 4 modes
There are 4 available modes for motor control. Press the corresponding key on the control unit to select
the desired mode.
Mode 1:1 - variable rotational speed
● For work with handpiece 1:1
● Rotational speed range: 500 – 40'000 rpm
● Reduce rotational speed with key ▼
● Increase rotational speed with key▲
DTM Mode - Fixed rotational speed
Fixed rotational speed at 8000 rpm
LIPO Mode - Fixed rotational speed
Fixed rotational speed at 10'000 rpm, corresponds to approx. 3700 strokes at the handpiece
THP Mode - Fixed rotational speed
Fixed rotational speed at 8000 rpm
5.4 Start motor
The motor can be started by activating the treadplate of the foot pedal

For safety reasons, the motor only runs if the foot pedal is connected.
6
5 Operation

LC display: ● representation of set mode
"1:1" : Key mode 1:1
"DTM" : Key mode Dermatome
"LIPO" : Key mode Liposuction
"THP" : Key mode Tattooing handpiece
" " : Run-back key
"▼" : Key Reduce motor rotational speed
"▲" : Key Increase motor rotational speed
"MOTOR" : Display Motor running
● set rotational speed
● run-back
No. 31739 26/12