Nouvag TCM 3000 BL Instrucciones De Uso página 27

Fault
Device does not
function at all:
Display not
illuminated
Foot pedal does not
function:
 Display illuminated
Motor does not run:
 Display illuminated
If a fault cannot be eliminated, please contact the supplier or an authorized servicecenter.
Description
Electronic motor 31ESS .............................................................................................................. 2064nou
Conform cannulae handpiece .......................................................................................................... 5074
One-way tube set for Conform cannulae handpiece ........................................................................ 6026
Vario pedal, IP68, electronic ........................................................................................................1871tcm
For orders of other parts, please contact our customer service who will be glad to assist you.

The safe and error free operation of the TCM 3000 BL can only be guaranteed at
the use of original accessories.
No. 31739 26/12
8 Faults and fault detection
Cause
Control unit not switched
on
No connection to the
mains
Defective fuse
Wrong operating voltage
Foot pedal not connected
Incorrect operation
No motor connection
Foot pedal step not
pressed down
Incorrect operation
9 Spare parts with order numbers
Elimination
Switch on main switch
"I/O" at the back of unit to
"I" position.
Connect control unit to
power supply.
Check fuses and replace if
necessary
Check mains voltage
Plug in foot pedal on the
front side of the control
unit
Check up operating
instructions
Plug in motor cable on the
front side of control unit
Press down step
Check up operating
instructions
TCM 3000 BL
Reference in
operating
instructions
5.1. Switching on the TCM
3000 BL
4.1 Connection to power
supply
7.1 Exchanging control unit
fuses
1.3 Technical data
7.1 Exchanging control unit
fuses
4.2 Foot pedal connection
4.3 Motor connection
5.4 Start motor
Art. No.
11