Idiomas disponibles
Idiomas disponibles
Swipe the card
"DELETE"
to start
16 - DELETE ALL USERS
To delete all users, follow the image below.
NOTES: By deleting all users (fingerprints and cards) the device settings and parameters are not changed.
Swipe the card
"DELETE"
to start
17 - DELETE MASTER CARDS (ENROLL, DELETE AND PROG)
To delete the master cards ("ENROLL", "DELETE" and "PROG") press the "PROG" button located on the back of the
product for 3 seconds. After that, 3 beeps will be emitted and the LED returns in the master card enrollment condition
(flashing blue).
NOTES: Deleting the master cards does not change the settings performed in the menus.
18 - ACESS THE SETTINGS MENU
To access the menu, bring the "PROG" card closer to the reader. A beep should be emitted.
The orange LED will then flash slowly, with each flash indicating a different menu function. To select it, bring the
"PROG" card closer during the lit LED or immediately after its deletion, where 2 short beeps will indicate the proper
selection. At this time, the LED will slowly flash with the color of the sub menu, indicating the available options. Set the
"PROG" card to the desired flashing, the instrument will confirm the selection with the green LED and 4 short beeps.
The setup menu is automatically closed after the last flashing of the function/option or when a card other than
"PROG" is selected.
Swipe the
"USER" card
The
Red LED
Swipe the card
"ENROLL"
The
Red LED
Continue deleting
Swipe the card
"USER"
again
The red LED
will flash quickly
Swipe the card
"ENROLL"
The red LED
will flash quickly
PROG BUTTON
ENGLISH
The green LED
lights up and 4 short beeps
are emitted indicating
success in the operation
again
The green LED
lights up and 4 short beeps are
emitted indicating
success in the operation
Swipe the card
"DELETE"
to close
Swipe the card
"DELETE"
to close
29
