P03 - Apaga (Delete) - Nice ANATEL Guarita IP Instrucciones Y Advertencias Para La Instalación Y El Uso

10.4 P03 - APAGA (DELETE)

Access the programming "P03 – APAGA (DELETE)" menu, image
10.4.a, then select the device type that will be deleted, and press
ENTER, image 10.4.b.
Insert the apartment number in the second line, where there are 4
digits to this edition (Apto.:0011) and then select the tower (BL.: A).
Note that the fourth line displays the total number of devices
registered to this unit (TOT:00001), image 10.4.c.
Advancing to the next line, will be displayed the device serial number
in the first line and the user identification in the third line, image 10.4.d.
Using the directional keys (↑ ↓), select the device to be deleted, through
its identification and/or serial number. Then press the ENTER key twice
to confirm the device exclusion. The message "Apagado com
sucesso!!! (Successfully deleted!!!)" will be displayed, image 10.4.e.
If there are more devices to delete, repeat the procedure.
Finishing the devices exclusions, turn the programming key off,
image 9.1.a. The message "Memória Alterada! Deseja Atualizar?
(Memory updated! Do you want to sync?)" will be displayed,
image 10.4.f, press ENTER. Then, the memory data of the
receivers connected to the system will be updated, image 10.4.g.
Wait until the "Atualização feita com sucesso (Updated
successfully)" message be displayed, image 10.4.h. Then, the
message "Backup automático (Automatic Backup)" will be
displayed, image 10.4.i, with the countdown of 5 seconds.
To cancel the backup press ESC before the countdown finishes
(finishing the countdown the backup will happen automatically); to
confirm the backup, press ENTER. "Aguarde... Backup automático
(Wait... automatic backup)" message will be displayed, image
10.4.j, indicating that a backup of all Guarita IP data is being
performed in the internal SD Card, image 3.1.a Ref. 10. After this,
the devices will be successfully removed.
Image 10.4.i.
Image 10.4.f
Image 10.4.h
Image 10.4.g
Image 10.4.j.
Image 10.4.a
Image 10.4.b
Image 10.4.c
Image 10.4.d
Image 10.4.e
Image 10.4.k
English - 122
Português -
122