Idiomas disponibles
Idiomas disponibles
L
Power supply feeding phase 230V / 120V
N
Neutral feed 230V / 120V
A1
Antenna shield
A2
Antenna
J1
START1 – Activation input 1 for connection of
traditional devices with N.O. (normally open)
contact
J2
START2 - Activation input 2 for connection of
traditional devices with N.O. (normally open)
contact
J3
STOP Command. N.C. (normally closed) contact
J4
Common (-)
J5
ST.NC - START input normally closed, to use for a
presence sensor
J6
Photocell. N.C. (normally closed) contact
J7
Setup for future use
J8
Safety ribbon
J9
Common (-)
Z1
Power output 24Vdc for photocells and other
accessories
Z2
Accessory power common (-)
Z3
Power supply - photocell/optical edge TX for
functional Test.
Connect power supply cables of photocells
transmitter between terminals Z2 and Z3
Z4
Low voltage light output (-)
(Warning light or flashing light (24V)
Z5
Power supply for low voltage lights and hold
electromagnets (+)
Z6
Hold electromagnet (-)
B1-B2
Contact N.A. (max. 230V-5A) for additional
courtesy light or flashing light
ADI
ADI interface
RECEIVER
Plug in receiver
FUSE
5 A
MAINS
It signals that the control unit is being powered
OVERLOAD It signals an overload on the accessories power
supply
ENGLISH - 61 -
