Idiomas disponibles
Idiomas disponibles
7. NUUR4: position the support (B) on the boom and fasten it to the
plate with the specific screws
NUUR6: position the support (B) on the boom and fasten it to
the counter-plate (C) then fasten everything to the plate with the
specific screws
m
For booms formed in two parts, the shortest part of the
boom must be fastened to the barrier lift.
20
NUUR4
8. position the cover of the support and fasten using the screws
supplied
21
B
NUUR6
C
9. in the NUUR4 version, install plate D
22
After installing the boom and the rubber impact
protector, before proceeding further, the other accessories – if
relevant – must be installed on the boom.
To install them, refer to the respective instruction manuals.
3.9 - ADJUSTING THE MECHANICAL LIMIT
SWITCHES
To adjust the limit switches, proceed as follows:
1. unlock the gearmotor with the relevant key provided (refer to the
B
"Manually unlocking and locking the gearmotor" paragraph)
2. manually move the boom so that it completes a full opening and
closing manoeuvre
3. turn the screws of the mechanical stops (A - B) to adjust the
boom's horizontal position, when it is closed, and its vertical
position, when it is open
23
4. after making the adjustments, tighten the nuts vigorouslyi.
D
NUUR 4
A
B
NUUR 6
A
B
ENGLISH - 55 -
