GE Monogram ZET1P Manual Del Propietário página 35

re and Cleaning
Wall Oven
Lift-oil
O_e7t
dooY_
Fe_lOrd (lÂ
The door is very heavy. Be careful when removhlg
mid lifting the door.
Do not l!fl the door by the ha:_:l/e.
To remove the door:
1 Fully open tile door.
2 Pull tile hinge locks down toward tile door
fl'ame, to the mdocked position. A tool, such
as a small fiat-blade screwdriver; may be
required.
3 Firmly grasp both sides of tile door at the top.
4 Close door to tile door remowd position,
which is most of tile way and lfli it up and out
tmtil the hinge arm is clear of the slot.
To replace the door:
1 Firmly grasp both sides of tile door at the top.
2 With tile door at tile same angle as tile
remowd position, seat tile indentation of tile
hinge arm into the bottom edge of the hinge
slot. The notch in the hinge am] nlust be
fldlv seated into tile bottom of tile slot.
3 Fully open tile door. If tile door will not flfllv
open, tile indentation is not seated correctly in
tile bottom edge of tile slot.
4 Push the hinge locks up against the fl'ont
fl'ame of the oven cavity, to the locked
position.
5 Close tile oven door.
Slot
Hinge lock
Pull hinge locks down to unlock
Removal p osition
t
Bottom ,_ a_rm
edgeof
Indentation
H
Pushhingelocksup to lock
Probe
Tile temperature probe may be cleaned with
soap and water or a soai)-filled scouring pad.
Cool the temperature probe before cleaning.
Scorn" stubborn spots with a soap-filled scom'ing
pad, 6nse and dry.
Do not hnme*:se the temperature probe in wate*:
Do nol slore the lempemtun_ probe hz the oven.
35