Paso 14 Segment Assembly (Part 3) - Prusa Research MMU3 Manual Del Usuario

PASO 13 Segment assembly (part 2)
Insert three M3n nuts into the marked openings on the Segment and push them all
the way in.
Add the wheel into the center of the segment.
Push the small shaft all the way through the middle of the bearing, until it engages
into the segment below.
PASO 14 Segment assembly (part 3)
Cover the assembly with another Segment part. Push both parts together to make
sure the center shaft engaged into the top segment too.
Join both parts together using four M3x6 screws.
Turn the assembly around.
Add the fifth M3x6 screw from the other side.
Repite el proceso con los 4 segmentos restantes.
7. Montaje del Casete del buffer
Ensamblaje Original Prusa MMU3 75