Prusa Research MMU3 Manual Del Usuario página 45

PASO 11 Selector assembly: Cutter parts preparation
PASO 12 Selector assembly: Cutter assembly
Insert the M3nS nut into the marked opening on top of the selector. Push it all the
way in.
Insert the two blades into the recess on the back of the selector. Make sure the
blades are seated nicely and do not overlap each other. The blades should be as
close together as possible.
Cover the blades with the blade holder. Verify the blades are still seated perfectly in
place while attaching the cover.
Fix the blade holder in place with M3x10 screw. Tighten it up fully.
5. Montaje del selector
Ensamblaje Original Prusa MMU3
Para los siguientes pasos, por
favor prepara:
M3nS nut (1x)
M3x10 screw (1x)
Blade holder (1x)
Blade (2x) - stored in the little
plastic box
Be very careful while handling
the blades! You might easily
harm yourself!
45