Prusa Research MMU3 Manual Del Usuario página 97

PASO 17 Extruder reassembly (Part 3)
Carefully and slowly push all the parts together.
In case of any significant resistance STOP immediately and check, which part is
blocking the movement.
Tighten the two M3x40 screws on the front of the extruder slightly - just so that the
extruder parts are held closer together. We will tighten the screws fully later on.
PASO 18 Adapter-printer parts preparation
9B. Mod extrusor MK3S+ (KIT)
Ensamblaje Original Prusa MMU3
Para los siguientes pasos, por
favor prepara:
Adapter-printer-mmu (1x)
The package should include only
the orange adapter. If you have
printed parts yourself, please don't
use the version with the hole for
steel ball. (used for single-material
printers)
97