Paso 3 Buffer Disassembly; Paso 4 Summary - Prusa Research MMU3 Manual Del Usuario

PASO 3 Buffer disassembly
PASO 4 Summary
28
3. Desmontaje Buffer MMU2S (UPG)
Ensamblaje Original Prusa MMU3
Remove the ten M3x40 screws.
Remove all the printed parts.
Set the printed parts aside so that
they don't mix up with the new
parts. These parts won't be re-used.
That was simple, wasn't it?
From the disassembled buffer,
please save the buffer plates for
later use.