JBM 54347 Manual De Instrucciones página 5

REF.54347
EN
INSTRUCTION MANUAL
PRODUCT'S PRESENTATION
Tool designed to detect various engine ope-
rating defects, such as defective piston rings,
defective valves, cracks in the cylinders or da-
maged head gaskets. For use in engines with
10,12 or 14mm spark plugs.
SAFETY INSTRUCTIONS
Read carefully this owner's manual before
using the product.
Failure to comply with the-
se instructions could result in
personal injury and/or dama-
ge to the product.
Please keep the instructions
for future reference.
Maintain the equipment in good and clean
condition for best and safest performance. DO
NOT use if damaged.
Wear approved eye protection, suit clothing to
avoid snagging.
Warning! The ignition must be tuned off. Turn
regulator knob fully anti-clockwise before
connecting to compressed air. Excess pressure
will damage the gauge and will invalidate the
warranty.
Keep hoses away from heat, oil and sharp ed-
ges. Check hoses for wear and make certain
that all connections are secure.
TECHNICAL SPECIFICATIONS
Adapters: M10x1.0, M12x1.25, M14x1.2
Working pressure: 45-100 PSI
Air inlet: Orion (1/4")
Weight: 2.4Kg
PARTS LIST
Number Description
1 Air supply
2 Pressure regulating valve
3 Valve
4 Hose
5 Pressure gauge
6 Cylinder leakage indicator
gauge
7 Connector
8 Hose with 14mm connector
9 12mm connector
10 10mm connector
11 O-ring
OPERATION
Run the engine until it reaches operating tem-
perature.
Stop the engine and remove the following:
- Spark plugs
- Oil dipstick
- Radiator cap
- Air filter from carburetor (or, if fuel injected,
remove air filter or hose).
· 5 ·