Cutting Speed; Operation; Switch Action (Fig.p) - HOLZMANN MASCHINEN HBS 245HQ Manual De Instrucciones

14.2.5 Cutting speed

The cutting speed should be selected depending on the hardness of the
material to be machined.
hart: 400m/min
 Open the lower cover.
 Slacken driving belt by turning the knob clockwise.
 Put driving belt on required pulley of the driving wheel (lower band saw wheel) and the
corresponding motor pulley.
 If necessary, adjusting the motor position to adjust the belt tension.
 Loosen the motor locking bolt (Fig.m; 1m) and turn the motor counter-clockwise to reduce
the driving belt tension, turn the motor clockwise to increase the driving belt tension.
Retighten the motor locking bolt.
 Half-way between the pulleys the driving belt should flex approx 10mm.
 Close the lower cover.
14.3

Operation

14.3.1 Switch Action (Fig.p)

 To start/stop the machine push the main switch (2p)
 To turn on/off the LED-work light push switch 1p
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
N O T I C E
weich: 800m/min
OPERATION
36
HBS 245HQ