Idiomas disponibles
Idiomas disponibles
Chapter 4
Page 26
4.3
Putting into Operation
Before the appliance is put into operation it must be clean and dry. Before the first use of the appliance, re-
move the protective plastic film from the metal plates.
The following appliance functions must be checked before putting it into operation:
§
In the mobile appliances: the functioning of the brake.
§
In the heated appliances: the functioning of the operating elements and heating.
INFO
4.4
Storage and Recycling
Temporary storage must take place in a dry and frost-free environment. The plate dispenser must be kept
covered with a suitable covering material to be protected against dust ingress.
The plate dispenser kept in the storage location must be checked for damages and corrosion every 6
months.
NOTE
Before the appliance is taken back into operation it must be clean and dry.
If the plate dispenser is required to be recycled, all the heating devices (if available) must be removed safely
and completely, the recyclable materials must be separated properly and disposed in an environmentally
compatible manner according to the Waste Disposal Regulations.
In any case, the local bodies responsible for disposal are to be involved for this purpose.
Plate dispenser
TE-2/V19-26, 27-33 | TE-2/VK19-26 | TEH-1/V19-26, 27-33 | TEH-2/V19-26, 27-33 | TEUH-1/VS19-26 | TEUH-2/VS19-26, 27-33 | TEUH-2/VC19-26
EBR/V19-26, 27-33 | EBRH/V19-26, 27-33 | EBRH-2/V19-26
Transport, Assembly, Putting into Operation and Decommissioning
Disposal of packing material
The packing consists of recyclable materials and can be disposed of appro-
priately. Thereby, the different materials are to be separated and disposed in
an environmentally compatible manner. In any case, the local bodies respon-
sible for disposal are to be involved for this purpose
Condensed water formation
Ensure that there is sufficient ventilation and no large temperature fluctuations
in the storage location to avoid condensed water formation.
Putting into Operation
4330000_A6
