Idiomas disponibles
Idiomas disponibles
COOLING SYSTEM
FILLING THE COOLANT
2
3
1
- Replace the bleed screw
- Refill the coolant into the radiator through the
cap
.
1
Approuved Coolant
- Fill coolant until is going out from the screw
- Put the screw
back in with a new seal.
3
Radiator bleed screw
- Continue filling.
- Fill until the coolant reaches the level (approximately
1.1 liters).
- Put the bike on the side stand and follow the rest
of the filling procedure ( p.103).
- Replace the cap
.
1
using a new sealt.
2
®
Motul
Motocool
Factory Line -35°C
.
3
M6X45
8Nm
105
