Spare Parts - salmson SIE BV Serie Instalacion Y Puesta En Servicio

English
12

Spare parts

Spare parts table
54
Spare parts may be ordered via a local specialist and/or Salmson after-
sales service.
To avoid queries and incorrect orders, all data on the name plate
should be submitted with each order.
CAUTION! Risk of damage!
Trouble-free pump operation can only be guaranteed when origi-
nal spare parts are used.
• Only use original Salmson spare parts.
• When ordering spare parts, please state the above-named spare
parts numbers and designations, as well as all data on the pump and
motor name plates.
NOTE:
For all installation work, the forked spacer is urgently required for set-
ting the correct impeller position in the pump housing.
Subject to technical change without prior notice!
Assignment of the modules, see Figs. 12, 13 or 14
No. Part
1.1 Impeller kit
1.11
1.12
1.13
1.14
1.2 Mechanical seal kit
1.11
1.12
1.14
1.21
1.3 Lantern kit
1.11
1.12
1.14
1.31
1.32
1.33
1.4 Shaft kit
1.11
1.12
1.14
1.41
2 Motor
3 Complete pump housing
1.14
3.1
3.2 Plug for differential pressure
measurement connections
3.3
4 Fastening screws for lan-
tern/pump housing
5 Fastening screws for motor/
lantern
6 Nut for motor/lantern fixation
7 Washer for motor/lantern
fixation
8 Adapter ring
9 Pressure measuring unit
10 Forked spacer
11 Module
12 Motor base
Details
Nut
Washer
Impeller
O-ring
Nut
Washer
O-ring
Compl. mechanical seal
Nut
Washer
O-ring
Bleed valve
Coupling protection
Lantern
Nut
Washer
O-ring
Complete coupling/shaft
O-ring
Pump housing
(not illustrated)
Switchover valve
(for double pump)
Pompes Salmson 03/2011